Kramer VP-81SIDN User Manual page 33

9.1.1 Authorized Users
By default, you are logged in as User and you can:

Select an active input or output

Adjust or mute/unmute the output volume

Change the device name

Modify the IP configuration
Options that you are not authorized to perform are grayed out.
When logged in as Admin, in addition to the User abilities, you can:

Modify the input priorities (see

Modify the input/output button characteristics (see

Upgrade the device firmware (see

Reset the device (see

Change the User and Admin Passwords (see

Enable/disable IR control
Note: Any actions that you are not authorized to perform are grayed out.
9.1.2 The Step-In Software Menu Bar
The following table describes the Menu Bar options.
Menu Bar Sub Menu
Options
FILE Connect/Disconnect
Exit
DEVICE
Details
Change Admin Password
Cascade
Firmware Update
Change Unit Password
Reset
IR Status
ABOUT NA
VP-81SIDN - Operating the VP-81SIDN Remotely
Section 9.1.9)
Section
Section 9.1.12)
Description
Connect or disconnect to the device
Exit the Step-in software
Retrieve and display the device details, such as, model,
unit name, version, and so on
Change the Admin password
Select the number of cascaded devices
Update the device firmware using a new firmware file
(Admin only)
Change the Admin user password (Admin only)
Power cycle the device (Admin only)
Enable or disable the IR control for the device
Displays the Step-in Software and Kramer company
details
Section 9.1.10)
9.1.11)
Section 9.1.12)
29