D Tx Code Channel Selection - Icom IC-F510 Instruction Manual

D Tx code channel selection

If the transceiver has a [TX CH] key, display can be toggled
between the operating channel number (or name) and Tx
code channel number (or name). When the Tx code channel
number (or name) is displayed, the [
the Tx code channel.
USING [TX CH] KEY:
q Push [TX CH] — a Tx code channel appears.
w Push [ ] or [ ] to select the desired Tx code channel.
e After selecting, push [TX CH] to set.
• Returns to the stand-by mode.
r Push [CALL] to transmit the selected Tx code.
USING [CH UP]/[CH DN] KEYS:
If the transceiver has a [CH UP] or [CH DN] key assignment,
the programmed TX code channel can be selected directly
when pushed.
D Tx code number edit
If the transceiver has a [CODE] or [TX CH] key, Tx code con-
tents can be edited within the allowable digits.
] or [ ] keys select TO EDIT A TX CODE:
q P ush [CODE] (or push and hold [TX CH]) to enter the TX
w P ush [CODE] (or push [TX CH]) to select the desired digit
e Push [
r P ush [CODE] (or push [TX CH]) to set. The digit to the
t Repeat e and r to edit all allowable digits.
y After editing, push [CODE] (or push [TX CH]) to set.
u P ush [CALL] to transmit the edited Tx code.
code edit mode.
• The digit to be edited blinks.
to be edited.
] or [ ] to select the desired digit.
right will blink automatically.
• Return to the stand-by mode.
2
OPERATION
10