Icom IC-F510 Instruction Manual page 15

D User set mode
User set mode is accessed at power ON and allows you to
set seldom-changed settings. In this case you can "custom-
ize" transceiver operation to suit your preferences and operat-
ing style.
Entering the user set mode:
q While pushing and holding [
to enter user set mode ON, allowing you to set seldom-
changed settings.
w Push and hold [P0] to enter user set mode. Push [P0] mo-
mentarily to select the item.
Then push [ ] and [
tion.
Available set mode functions:
• Backlight : AUTO, DIM, OFF or ON
• Beep : ON or OFF
• Beep Level : 1 to 5 or Link (links to audio output level)
• SQL Level : 0 to 255
• AF Min level : 0 to 255
• Audio Filter : 3000, 3400, 0 or 300
• Mic Gain : 1 to 5
e Push [POWER] (or push and hold [P0]) again to exit set
mode.
] and [ ], push [POWER]
] to set the desired level/condi-
User set mode also available via the programmable key.
Please refer p. 7 [SET] section.
[SET] is allowed for the quick item selection. Set "Enable" for
the often used items with the CS-F500
2
OPERATION
.
cloning software
12