Kenwood DNX7140 Instruction Manual page 65

Gas Mileage Analysis (DNX models)
I .
!
Measures the gas mileage.
i
I
0
Display the Gas Mileage screen
Touch
[et]
> [,....] >
[Information]
>
[Vehicle]
>
[Gas Mileage Analysis]. (page 63)
II
Display the information about the gas
mileage
[Reset] Resets the trip meter.
[Input] Input the information about the
gasoline filled. (Step 3)
[History] Displays the history of mileage. (Step
5)
Input the information about gasoline
D
Display the Input Gas Information screen
cost / galton
$
2 75
Gallons r.lIed 2010 calion Input
Driven DIstance I 2600 mile
b
s m i l e 2
l'
~
II
Inputs the information about gasoline
[cost / liter], [cost / gallon] Selects the mode
to input the cost per liter/gallon.
[Liters Filled], [Gallons Filled] Selects the
mode to input the amount of gasoline filled.
ITJ
Input information.
[Clear] Erases the entered digit.
If touched more than 1 second, all the input
digits are erased.
[CALC] Determines the input information and
returns to the previous screen.
[Cancel] Cancels the input information.
Displays the history of gas mileage
D
Display the Gas Mileage History screen
mile IlI;dllon 12 9 mllt:al
gallon I 100 mile
77 cal HIS ory .,;;;)
~
, .
Ridgeview~ 9999~
D
Display the history of gas mileage
[I]
Displays up to three gas mileages.
[Delete] Deletes the history.
Vehicle Setup (DNX models)
Sets the unit of distance and the unit of amount
of gasoline.
o
Display the Vehicle SETUP screen
Touch [8]
> [,....] >
[Information]
>
[Vehicle]
>
[Vehicle SETUP] (page 63)
D
Set the units
[mile]/ [km] Set the unit of distance.
[gallon]/ [liter] Set the unit of amount of
gasoline.
English 65