Removing The Unit - Kenwood DNX7140 Instruction Manual

Removing Monitor/Player Unit
Removing the Hard Rubber Frame
(escutcheon)
1. Engage the catch pins on the removal tool
®
and
remove
the two locks on the lower
level.
Lower the frame and pull it forward as shown in
the figure.
Q
~
• The frame can be removed from the top side in the same
manner.
Removing the Unit
1. Remove
the hard rubber frame by referring to the
removal procedure in the section <Removing the
Hard Rubber Frame>.
2. Insert the two
removal
tools
®
deeply into the
slots on each side, as shown.
3. Lower the removal tool toward the bottom, and
pullout the unit halfway while pressing towards
the inside.
Q
~
Be careful to avoid injury from the catch pins on the
removal tool.
4. Pull the unit all the way out with your hands, being
careful not to drop it.
English
I 11