Kenwood DNX7140 Instruction Manual page 79

[Front Speaker] Sets the location of the front
speaker.
"Door", "On Dash", "Under Dash"
[Rear Speaker] Sets the location of the rear
speaker.
"Door", "Rear Deck"
"2nd Row", "3rd Row" (Minivan, Minivan (Long))
[Adjust] Displays the Car Type Adjust screen.
You can adjust the digital time alignment that
was set automatically when you selected the
car type.
In
Ivan
Location A d j u s t " ' -
cmm ,..
vie~. 99999.99~
Speaker Location setup
D
Display the Speaker Location Setup screen
D
Set the speaker locations
[Phase] Sets the phase of subwoofer output.
The phase is reversed 180 degrees when set
to "Reverse".
Sets the sub woofer phase (Only when
"Subwoofer" is set to "ON" in Audio Setup)
[HPF FREQ] High Pass Filter adjustment.
(When front speaker or rear speaker is selected
on Speaker Select screen)
[LPF FREQ] Low Pass Filter adjustment. (When
Subwoofer is selected on Speaker Select
screen)
[Slope] Sets a crossover slope.
Car Type (OTA) Setup
You can setup the car type and speaker network,
etc.
r
D
Set the crossover
I
1
D
Display the Car Type Setup screen
Touch [et]
>
[~]
>
[Audio SETUP]
>
[Car
Type] (page 63)
D
Setup the Car Type
If your car type is selected, the Digital Time
Alignment and Equalizer is set automatically (for
timing adjustment of sound output for each
channel) to have the highest surround effects.
ITJ
Sets up the car type you use together with
this unit.
You can choose according to type of your car.
"OFF", "Compact", "Full Size Car", "Wagon",
"Minivan", "SUV", "Minivan (Long)"
[Location] Sets the locations of the speakers
Car Type Adjust
You can manually set the sound output timing of
each channel.
D
Display the Car Type Adjust screen
In ,van
tocatton
" ' " Ad~ ~~t" ~~"~
cmm ,..
Rid~evi~.~~ 99999.99~,
D
Select a speaker you wish to adjust
OJ
Front speaker
[II
Rear speaker
UJ
Subwoofer
Nextpage~
English 79