Playback Screen - Kenwood DNX7140 Instruction Manual

Set the remote controller mode switch
to
"DVD" mode before starting operation, see <Remote Controller mode switch>
(page 87).
Playback Screen
Basic functions are available even when the
playback screen is displayed.
D
Display the Playback Screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
D
Operation on the Playback Screen
OJ, W
JiiV1QEQ
Searches for a chapter.
,~VR. Searches for a chapter.
~G:'Idl!o;.m Selects a scene (when PBC is
On) or a track (when PBC is Off).
[l],~VJQEO Displays the Menu Control 1 Screen
(page 20).
.C»lffl:
Displays the Menu Control Screen
(page 21).
~Ci"Kk!9.m Displays the Zoom Control Screen
(page 21).
W
Displays Source Information Screen.
@2
• The information display is cleared automatically after
approximately 5 seconds.
18 DNX7140/DNX7000EX/DDX714/DDX7034BT
Easy Control Screen
Displays the basic operation buttons on the
screen.
D
Display the Easy Control Screen
See <How to Display the Easy Control buttons>
(page 17).
D
Operation on the Easy Control Screen
OJ,
[l]
Switches to the Playback Screen.
W
Displays the Source Control Screen.
[~], [~]
Searches for a chapter/ scene/
track.
[_] Stops playing.
[~II]
Plays or pauses.
Source Control Screen
Switches to the source control screen to use
various playback functions.
D
Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 14)
D
Operation on the Source Control Screen