Carrying Out Basic Settings - Hirschmann MACH 4002 Family User Manual

2.3

Carrying out basic settings

IP addresses must be entered when the device is installed for the first time.
The device provides 6 options for configuring the IP addresses:
D
Entry via the V.24 connection.
D
Entry by HiDiscovery protocol
D
Configuration via BOOTP
D
Configuration via DHCP
D
Configuration via DHCP Option 82
D
The AutoConfiguration Adapter
State of delivery
U
D
IP address: The device looks for the IP address using DHCP
D
Password for management:
user, password: public (read only)
admin, password: private (read and write)
D
V.24 data rate: 9.600 baud
D
Ring redundancy: off
D
ETHERNET ports: Link status is not evaluated (signal contact)
D
Optical 100 Mbit ports: 100 Mbit full duplex
All other ports: autonegotiation
D
Redundancy manager switched off
D
Stand-by coupling off
USB interface
U
The USB socket offers an interface for the local connection of an Auto-
Configuration Adapter ACA 21-USB. It is a device for saving/loading the
configuration and for loading the software.
Pin number
1
2
3
4
MACH 4002
Release 1.0 10/05
Signal name
VCC
- Data
+ Data
Ground
31