Carrying Out Basic Settings - Hirschmann RS20 Series User Manual

RM - Redundancy Manager
(green/yellow LED)
lit green
lit yellow
not lit
flashes green
Stand by
lit green
not lit
1)
If the manual adjustment is active on the signal contact, then the
error display is independent of the signal contact setting.
Port status
U
The green and yellow LEDs on the specific ports display port-related
information. During the boot phase, the status of the boot procedure is
displayed with these LEDs: .
LS (Link status, green LED)
not lit
lit green
flashes green
(1 time per second)
flashes green
(3 times per second)
DA (Data, yellow LED),
not lit
flashes yellow
2.3

Carrying out basic settings

IP addresses must be entered when the device is installed for the first time.
The device provides 6 options for configuring the IP addresses:
D
Entry via the V.24 connection.
D
Entry by HiDiscovery protocol
D
Configuration via BOOTP
D
Configuration via DHCP
D
Configuration via DHCP Option 82
D
The AutoConfiguration Adapter
22
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Meaning
RM function active, redundant port not active
RM function active, redundant port active
RM function not active
Incorrect configuration of HIPER-Ring (e.g. ring not
connected to ring port
Meaning
Stand by opeartion active
Stand by operation not active
Meaning
no valid connection
valid connection
port is switched to stand-by
port is disabled
Meaning
no data reception at the specific port
data reception at the specific port
RS20/RS30
Release 2.0 03/06