Pair And Replace Extra New Baby Unit - VTech BM2500 User Manual

Using your baby monitor

Pair and replace extra new baby unit

The baby units and parent unit provided are already paired.
You can add or replace any baby units (purchased separately
to your video and audio monitor system.
You can pair a maximum of four baby units to your parent unit.
Each new baby unit must be paired to the parent unit before use .
To pair and replace a baby unit:
Press MENU/
1.
2. Press or
3. Press or
/SELECT. The screen displays
MENU
If you choose an occupied baby unit slot, the new baby unit will
replace the existing baby unit.
4. Turn on the new baby unit, and then immediately
press and hold PAIR until the POWER light flashes.
When pairing is successful, the screen displays
the image from the newly paired baby unit.
To unpair a baby unit:
Make sure you power on the baby unit and the parent unit before
unpairing the baby unit.
Press MENU/
1.
2. Press or
3. Press or
4. Press and hold TALK until
5. Press or
unpair process.
6. Press
MENU
When unpairing is successful, the POWER light on the selected
baby unit flashes. The parent unit displays
then the image from the baby unit previously viewing.
when the parent unit is not in
SELECT
to choose
to choose a desired baby unit slot, then press
when the parent unit is not in
SELECT
to scroll to
to select the desired baby unit (1, 2, 3 or 4).
to select
/SELECT to confirm your selection.
.
.
and display.
to cancel, or
25
use.
.
, and then
use.
to confirm the
for a while, and