Scan Area; Select Setting Side - Bell and Howell Tr?per Feature Manual

The Scan Area option allows a selected portion or region to be scanned, rather than the entire document.
The scanning area is specified by the start position X (horizontal) and Y (vertical) from the top left corner of
the paper, the image width and the length.
Note
The scanning area function cannot be used at the same time as Automatic Crop, Deskew, Margin,
Detect Paper Width, Control Sheet or Length Control.
In the case of duplex scanning, only X can be set separately for the front and back.
To access the Scan Area window:
1. Select Preview Settings from the Scan menu.
2. Click the Area button on the Preview Settings window.
The Scan Area window appears.
For information on the Select Setting Side property, refer to your application's user manual.

3.4.1 Select Setting Side

www.bbhscanners.com

3.4 Scan Area

34 of 48