Table of Contents
Advertisement
For information on the Line Removal property, refer to your application's user manual or the VRS User's
Manual.
2.6 Image Filters using VRS Adjustment Controls
The image filters in the VRS Adjustment Controls window allow you to utilize functionality such as Auto
Orientation, Noise Reduction, and so on. Using these features enhances the output of your scanned
document.
To view the VRS Adjustment Controls:
1. Select Scanner from the Source menu.
2. Click Bowe Bell + Howell 3200 with AIPE from the Select Scan
Source drop-down list, and then click the OK button.
The scanner resets the flatbed to the "home" position. When the icons
on the toolbar become active, you are ready to begin.
3. Select Advanced Properties from the Source menu.
4. Select Scanner Driver Settings from the Tools menu.
The VRS Adjustment Control window appears.
The Brightness function adjusts the image brightness. There are 3 preset modes - Darken, Normal and
Lighten. When the brightness is set to be darkened, light colored characters and objects are easier to see.
Alternately, when the slide is selected to be lightened, fine dots or noise are eliminated. A balance between
eliminating the unwanted dots and document quality can be manually set. The range is between 1 and 255
with a default setting of 128.
Note
There are independent back and front side settings for the brightness.
2.6.1 Brightness and Contrast
www.bbhscanners.com
2.5.5 Line Removal
24 of 48
Advertisement
Table of Contents
