Drive Chain - HYOSUNG Aquila Owner's Manual

The clutch lever play
The lock nut
The clutch lever adjuster
The rubber boot
The cable adjuster
The clutch cable adjuster lock nut
If you find the play of the clutch incorrect,
adjust it in the following way :
◉ CLUTCH CABLE
1. Loosen the lock nut
adjuster turn all the way toward clockwise.
2. Loosen the clutch cable adjuster lock nut
Turn the cable adjuster
lever play should be 4mm(0.16in).
3. A little adjustment be allowed by the clutch
lever adjuster .
4. After end of adjustment, tighten the lock nut
, and cover the rubber boot

DRIVE CHAIN

The chain may require more frequent adjust-
ment that it is with periodic maintenance
depending upon your riding conditions.
Check the chain every 1,000km.
WARNING
Riding with the chain in poor condition or
improperly adjusted can lead to an acci-
dent.
Inspect, adjust, and maintain the chain
properly before each ride, according to
this section.
and the clutch lever
.
that the clutch
.
◉ Insepcting the Drive Chain
When inspecting the chain, look for the follow-
ing:
● Loose pins
● Damaged rollers
● Dry or rusted links
● Kinked or binding links
● Excessive wear
● Improper chain adjustment
If you find something wrong with the drive chain
condition or adjustment, correct the problem if
you know how. If necessary, consult your autho-
rized Hyosung dealer.
Damage to the drive chain means that the
sprockets may also be damaged. Inspect the
sprockets for the following:
Good
● Excessively worn teeth
● Broken or damaged teeth
● Loose sprocket mounting nuts
If you find any of these problems with your
sprocket, consult your Hyosung dealer.
CAUTION
The two sprockets should be inspected
for wear when a new chain is installed and
replace them if necessary.
29
Worn