When The Engine Refuse To Start; Carburetor - HYOSUNG Aquila Owner's Manual

1. Remove the screws
2. Push in the bulb, turn it to the counter-clock-
wise, and pull it out.
3. To fit the replacement bulb, push it in and turn
it to the clockwise while pushing.
CAUTION
Overtightening the screws may cause the
lens to crack.
◉ FUSE
and the lens. The fuse box is located behind the right frame
cover. If the engine suddenly stops while run-
ning or any electrical system fails to operate
then the fuse must be checked.
In case a fuse blows there is a 15A spare fuse.
CAUTION
Never use other than specified 15A fuse.
Installing a fuse of incorrect rating may
seriously damage the electrical system.
You should consult your Hyosung dealer
or a qualified service mechanic immedi-
ately.
WHEN THE ENGINE REFUSES TO START
◉ TROUBLE SHOOTING
If the engine refuses to start, perform the follow-
ing inspections to determine the cause.
● Fuel Supply Check
Is there enough fuel in the fuel tank?
Is the fuel reaching the carburetor from the
fuel cock?
Disconnect the fuel line from the carburetor,
turn the fuel cock to the ON position and
see if gasoline flows from the hole.
If it has been determined that fuel is reaching
the carburetor, the ignition system should be
checked next.
CAUTION
Do not allow the fuel to spill.
Catch the fuel in container.
Do not allow any fuel to come in contact
with the hot engine or exhaust system.
Extinguish any smoking materials before
performing this check, and stay away
from any other fire or heat source.
37