Antenna Board - HP 10 G2 2301 Maintenance And Service Manual

Antenna board

Before removing the antenna board, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2. Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see
5. Remove the battery (see
6. Remove the speaker (see
7. Remove the rear-facing webcamera (see
Remove the antenna board:
▲ Remove the antenna board (1) without detaching the soldered connection.
Reverse this procedure to install the antenna board.
16 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Back cover on page 11).
Battery on page 13).
Speaker on page 14).
Rear-facing webcamera on page 14).