To Adjust Ringer Volume; To Set The Ringer Pitch; Memories; To Store A Number In The Memory - Telstra T210 User Manual

Using your Telstra T210
11
If the ringer is set to OFF,the
To adjust the ringer volume
call indicator light will still
There are 3 volume settings to choose from:
flash to indicate somebody is
HIGH, LOW or OFF. The default setting is
calling you.The display will
HIGH.
show RINGER OFF when
you lift the handset or use
handsfree.
1. Lift the handset and press the
2. Press the
The display will show:
3. Press either
for OFF.
4. Press the
Your selected setting will be displayed.
You will hear a confirmation tone and the
display will show
5. Replace the handset.

To set the ringer pitch

The ringer pitch can be set to High or Low.
The default setting is High.
1.Lift the handset and press the
2. Press the
The display will show
3. Press either,
4. Press the
You will hear a confirmation tone and the
display will show
5. Replace the handset.
button.
Store
button.
BELL LEVEL HI .
for HIGH, for LOW or
button.
Store
SAVED .
button.
Store
button.
BELL Pitch HI.
for HIGH or for LOW.
button.
Store
SAVED.

Memories

You can store 10 telephone numbers in the
memories.

To store a number in the memory

1. Lift the handset.
2. Press the button.
Store
3. Press the memory location number
between 0 and 9 under which you want to
store the number. The display shows, e.g.
Loc-8 if you want to store in location 8.
4. Enter the telephone number you want to
store, including the area code if applicable.
5. Press the button.
Store
You will hear a confirmation tone and the
display will show SAVED .
6. Replace the handset.
To dial a number in memory
Lift the handset and wait for dial tone.
1. Press the button.
Memory
Enter the memory location number
between 0 and 9, under which the number
is stored.
The number is displayed and dialed
automatically.
Using your Telstra T210
12
Numbers can be no longer
than 18 digits long.
You can mix manual and
memory dialing as required,
for example,you can dial the
area code 02 8304 from the
memory and then complete
the number manually.