Help; Important Safety Instructions; General Information - Telstra T210 User Manual

Help

19
If you have any difficulty using your Telstra T210, this section provides
solutions to the most common problems.
No dial tone
Make sure the telephone line cord is plugged into the telephone socket
at the back of the unit and that the telephone line cord is connected to
your wall socket.
Check that no other extension is in use.
Phone does not ring
Check that the ringer is not switched off on your T210. Unplug the
Telstra T210 and connect a telephone that is known to be working.
Check that no other connected phones are off the hook.
Check whether you have too many phone extensions in your home or
office.

Important safety instructions

Read and understand all instructions.
Follow all warnings and instructions marked on this product.
Do not use this product during an electrical storm, as it is possible to get a
shock.
Do not use this product when near water, or when wet.
Make sure the line cords are protected from damage.
Keep the product away from heaters and away from sunlight.
Do not use this telephone near flammable gases or liquids.
Slots and openings in the cabinet are provided for ventilation, to protect it
from overheating. Ensure these are not blocked or covered.
Do not open the unit. There are no user serviceable parts inside. Warranty
conditions will not apply if the unit has been opened.
Unplug this unit before cleaning. Do not use detergents or sprays. To
clean the outside plastic parts, use only a damp cloth.
Do not push objects into ventilation openings. This could cause an
electrical shock.

General information

This Unit complies with Australian Communications Authority Technical
Standards. If the quantity of ringing devices connected to the telephone
line exceeds a REN of 3, it may result in some devices not ringing in
response to an incoming call. To check the REN of each device, refer to the
base label.
Help
20