To Delete Stored Numbers; To Insert A Pause In A Memory Number; One-Touch Memories; To Store A One-Touch Number - Telstra T210 User Manual

Using your Telstra T210
13
If any errors occur in the

To delete stored numbers

storing mode you will hear
three short beeps,then the Lift the handset
product will return to talk
mode.
1. Press the
If you unplug your Telstra
T210 the numbers stored in
Enter the memory location number (0-9)
the memory will be saved.
However,the last number under which you have stored the number
redial memory will be lost.
you wish to delete.
2. Press the
confirmation tone.
Replace the handset.
Alternatively, any existing number stored in
the memory can be overwritten by entering
a new number under the same memory
location. Simply follow the instructions
under the storing number section previously
shown.

To insert a pause in a memory number

Sometimes you may need to enter a pause
when storing a number, e.g. with an overseas
number you may need to enter a pause after
storing the international code.
1. Press the
you want to enter a pause. When you dial
the number your T210 will automatically
insert the pause where you stored it.
button.
Store
button. You will hear a
Store
button in the place where

One-Touch Memories

The Telstra T210 comes with 3 Telstra Phone
Features preprogrammed into the M1,M2
and M3 buttons. Should you wish, these can
be overwritten with your own frequently
dialed numbers.

To store a One-Touch number

1. Lift the handset.
2. Press the button. The display will
Store
show Loc- .
3. Press the network feature button, under
which you want to store the number.
The display will show, e.g. if you
Loc-d1
want to store under Call Waiting button or
M1.
4. Enter the telephone number you want to
store including the area code if applicable.
5. Press the button.
Store
You will hear a confirmation tone and the
display will show SAVED .
6. Replace the handset.
Using your Telstra T210
14
For mor information on these
features please call 13 2200.
Please note that the number
can be no longer than 18
digits.
Whilst storing a number in
the memory you can cancel
the operation by replacing
the handset on the cradle.
If you delete a number in any
of the One-Touch memories,
the key automatically reverts
to its factory programmed
Telstra Network Feature.
A blank memory label is
provided to note your
frequently used numbers.