Mute; Handsfree - Telstra T210 User Manual

Using your Telstra T210
9

Mute

When on a call you can talk to someone in
the same room, without your caller hearing.
To switch mute on and off
1. During a call press and release the
button.
The caller will be put on hold. You can
now talk to someone in the room without
your caller hearing you. The display will
flash MUTE
2. Press and release the
return to your callers.
to confirm mute is on.
button again to
Handsfree Operation
The handsfree feature allows you to use the
phone without picking up the handset,
giving you more freedom when you are
speaking on the phone. You can hear the
caller's voice through the in-built speaker.
To make a handsfree call
1. Press the button.
The handsfree light will come on and you
will hear the dial tone. The display will
also show the volume level.
2. Dial the telephone number.
You can now talk to your caller through
the microphone, or pick up the handset to
speak to your caller privately.
To receive a call using Handsfree
1. Press the button when the phone
rings.
To change the volume on a handsfree
call
You can adjust the speaker volume when
you are on a handsfree call.
1. Press the button. The volume level
will be shown on the display.
There are 5 levels to choose from. It is pre-
set to the mid-range level.
2. Press the button to move up and
down each level.
Using your Telstra T210
10
Important:
Your Telstra T210 is specially
designed to operate without
the need of a mains power
supply.It is therefore
necessary to make your first
call via the handset.This call
should last at least 1 minute.
Subsequent calls can now be
made using the handset or
Handsfree feature.
You can swap between the
handset and handsfree
during a call.
If using the handset,press the
button and replace the
handset.
If using handsfree,lift the
handset to talk privately.
You can only change the
volume of a call when using

handsfree.