Section 2: Installing The Stabilizer - Hangar 9 Tribute 4D 36 Plug-N-Play Assembly Manual

Section 2: Installing the Stabilizer

Required Parts
• Stabilizer assembly
• Stabilizer fixing screw (2)
Required Tools and Adhesives
• Threadlock

Step 1
Locate the stabilizer/elevator assembly. Position the
stabilizer/elevator assembly so the control horn will
face down, away from the fin. Carefully slide the
assembly into the fuselage.

Step 2
Secure the stabilizer using the two stabilizer fixing screws.
It's a good idea to use a drop of threadlock on the threads
to keep them from loosening during flight.
• Fuselage

Step 3
Attach the clevis to the elevator horn. With the radio on,
center the elevator servo. Thread the clevis in or out so the
elevator is in neutral.
7