Additional Required Tools And Adhesives; Field Equipment Required; Warning; Using The Manual - Hangar 9 Tribute 4D 36 Plug-N-Play Assembly Manual

Additional Required Tools and Adhesives

Tools
• Flat blade screwdriver
• Phillips screwdriver (small)
• Crescent wrench
• Threadlock

Field Equipment Required

• Propeller APC 11x4 (APC11040)
• Fuel
• Glow Plug Wrench (HAN2510)
• Glow Plug Igniter with Charger (HAN7101)
• Glow Plug (HAN3001/3006)
• Manual Fuel Pump (HAN118)

Warning

An RC aircraft is not a toy! If misused, it can cause serious bodily harm and damage to property. Fly only in open areas,
preferably at AMA (Academy of Model Aeronautics) approved flying sites, following all instructions included with your
radio and engine.

Using the Manual

This manual is divided into sections to help make assembly easier to understand, and to provide breaks between each
major section. Remember to take your time and follow the directions.
4
Other Required Items
• Felt-tipped pen or pencil
• Measuring device (e.g. ruler, tape measure)
• Covering Iron (HAN101)
• Covering Glove (HAN150)
• Sealing Iron Sock (HAN141)