Spooler Warm-Start File; Tmf Warm-Start File; Tcp/Ip Stack Configuration And Startup File - HP NonStop NS-series Operation Manual

Creating Startup and Shutdown Files

Spooler Warm-Start File

This example command file warm starts the spooler.
After the spooler has been brought up, the printer devices should be in the WAITING
state. This file can be invoked automatically from the STRTSYS file, or you can invoke
it by using the following TACL command:
> OBEY $SYSTEM.STARTUP.SPLWARM
comment -- This is $SYSTEM.STARTUP.SPLWARM
comment -- This file warm starts the spooler, leaving all jobs intact.
SPOOL / IN $SYSTEM.SPL.SPL, OUT $ZHOME, NAME $SPLS, NOWAIT, PRI 149, &
CPU 1/0
SPOOLCOM; SPOOLER, START
comment -- check to see that the spooler started successfully
SPOOLCOM; SPOOLER, STATUS

TMF Warm-Start File

This example command file warm starts the TMF subsystem.
This file can be invoked automatically from the STRTSYS file, or you can invoke it by
using the following TACL command:
> TMFCOM / IN $SYSTEM.STARTUP.TMFSTART, OUT $ZHOME /
-- This is $SYSTEM.STARTUP.TMFSTART
-- This file warm starts the Transaction Management Facility (TMF) subsystem
-- and checks to see if TMF started successfully.
START TMF;ENABLE DATAVOLS *;STATUS TMF;EXIT

TCP/IP Stack Configuration and Startup File

Configuration data for NonStop TCP/IP (conventional TCP/IP) processes is not added
to the configuration database. Therefore, TCP/IP stacks must be both configured and
started for each LAN port that connects to a SWAN concentrator each time you start
the system, unless you are using NonStop TCP/IPv6 over SWAN. (If so, see the
manuals that support those TCP/IP subsystems.)
You can create TACL command files to configure TCP/IP stacks on the other ports by
assigning the appropriate values the following variables in this example file:
GW^ADDR
HOST^NAME
IP^ADDR
The NonStop TCP/IPv6 subsystems participate in the system configuration database
(however, not with the initial configuration database that is shipped with a new system).
TCP/IP Configuration and Management Manual
TCP/IPv6 Configuration and Management Manual
HP Integrity NonStop NS-Series Operations Guide —529869-005
LINE^NAME
LST^NAME
TCP^CPU1
16 -14
Spooler Warm-Start File
TCP^CPU2
TCP^NAME
TEL^NAME