HP NonStop NS-series Operation Manual page 93

Communications Subsystems: Monitoring and
Recovery
This listing shows that the Expand line-handler process being monitored is up and
functioning normally.
The data shown in the report means:
Name
State
PPID
BPID
ConMgr-LDEV
If any state other than STARTED appears, check the meaning of the state in
Object States on page 3-14. Depending upon the type of problem, follow your
established procedures for problem reporting and escalation.
Examples
To check the detailed status of line $LHCS6S:
> SCF STATUS LINE $LHCS6S, DETAIL
A listing such as this output is sent to your home terminal:
-> STATUS LINE $LHCS6S, DETAIL
PPID.................... ( 3, 24) BPID................ ( 2, 24)
State................... STOPPED
Trace Status............
ConMgr-LDEV.............
Path-prim
Path-alter
To display the status of all the Expand lines that are currently active on your system,
enter this INFO PROCESS command for the Expand manager process $NCP:
-> INFO PROCESS $NCP, LINESET
HP Integrity NonStop NS-Series Operations Guide —529869-005
Specifies the name of the object
Indicates the summary state of the object, which is either
STARTED, STARTING, DIAGNOSING (for SWAN concentrators
only), or STOPPED
Specifies the primary process ID
Specifies the backup process ID
Contains the LDEV of the concentrator manager process. This
field applies only to SWAN concentrator lines.
Path LDEV...........
OFF Clip Status......... UNLOADED
49
6- 11
Monitoring Line-Handler Process Status
50
SCF