HP NonStop NS-series Operation Manual page 199

Starting and Stopping the System
1. Select Start > OutsideView > OutsideView. The OutsideView dialog box appears.
2. Select Session > New. The New Session Properties dialog box appears.
3. On the Session tab, in the Session Caption box, type a session caption name such
as Startup Events or Startup TACL.
4. Click IO Properties. The TCP/IP Properties dialog box appears.
5. Type the DNS name or IP address of the maintenance entity (ME) or integrated
maintenance entity (IME), followed by a space, and the port number of the window
type (303 for the startup event stream window, and 301 for the startup TACL
window).
For example, for the startup event stream window:
me-system1- G100-M02 303
me-system1- G100-M03 303
192.231.36.2 303
Then, for the startup TACL window:
me-system1- G100-M02 301
me-system1- G100-M03 301
192.231.36.2 301
6. Click OK. The TCP/IP Properties dialog box closes, and you are returned to the
New Session Properties dialog box.
7. Click OK. The startup event stream window or startup TACL window appears. A
TACL prompt appears in the startup TACL window.
Consult the OSM Event Viewer for any important system startup messages logged to
the EMS log that you might have missed while opening the terminal-emulation
windows.
HP Integrity NonStop NS-Series Operations Guide —529869-005
Opening Startup Event Stream and Startup TACL
15 -23
Windows