Exiting The Osm Low-Level Link; Opening Startup Event Stream And Startup Tacl Windows; Figure 15-3. Opening A Startup Tacl Window; Figure 15-4. Outsideview Buttons On The Windows Toolbar - HP NonStop NS-series Operation Manual

Starting and Stopping the System

Exiting the OSM Low-Level Link

If all processors in the system have been halted and you are unable to log off, press
Alt-F4 to exit the OSM Low-Level Link.

Opening Startup Event Stream and Startup TACL Windows

When you perform a normal system load, these windows open automatically. If the
windows do not open or if you close them, you can reopen them using either OSM or
Outside View.
To open startup event stream windows and startup TACL windows from OSM:
1. Log on to the OSM Low-Level Link.
2. From the File menu, select Start Terminal Emulator > For Startup TACL.

Figure 15-3. Opening a Startup TACL Window

3. Two OutsideView windows launch on top of the other. If you do not see the TACL
prompt in one OutsideView window, check the other OutsideView window by
clicking the buttons on the Windows toolbar.

Figure 15-4. OutsideView Buttons on the Windows Toolbar

4. From the File menu, select Start Terminal Emulator > For Event Streams.
5. Two OutsideView windows appear, but one launches on top of the other. If you do
not see the TACL prompt in one OutsideView window, you can check the other
OutsideView window (see
To open startup event stream windows and startup TACL windows using Outside View:
HP Integrity NonStop NS-Series Operations Guide —529869-005
VST813.vsd
TIF719
Figure 15-4).
15 -22
Exiting the OSM Low-Level Link