BenQ EW2430V User Manual page 41

CEC When activated and the
(EW2730V only) monitor is connected to a
multimedia device
supporting CEC feature
through HDMI, the device's
remote control can be used
to turn on the device and the
monitor simultaneously. If
the monitor is switched off,
the device is off as well.
Source Auto When this function is
Search activated, HDMI and
Component ports will be in
the input auto select loop.
Otherwise, these sources can
only be selected by input
select or by hot key.
Auto Power Off Sets the time to power off the
monitor automatically in
power saving mode.
Information Displays the current monitor
property settings.
Reset All Resets all mode, color and
geometry settings to the
factory default values.
*DDC/CI, short for Display Data Channel/Command Interface, which was developed by Video Electronics
Standards Association (VESA). DDC/CI capability allows monitor controls to be sent via the software for
remote diagnostics.
Synchronization with other
devices through HDMI
CEC may be available but
not guaranteed.
Press the key to select
ENTER
this option. Press the
keys to change the
settings.
Press the key to select
ENTER
this option. Press the
keys to change the
settings.
Press the key to select
ENTER
this option. Press the
keys to change the
settings.
Press the or keys to
change the settings.
• ON
• OFF
or
• ON
• OFF
or
• OFF
• 10min.
or
• 20min.
• 30min.
• Input
• Current
Resolution
• Optimum
Resolution (best
with the
monitor)
• PIP/PBP Status
• PIP/PBP Source
• PIP/PBP
Resolution
• Model Name
• YES
• NO
How to adjust your monitor 41