BenQ EW2430V User Manual page 11

You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
2. Connect the video cable.
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end without
the ferrite filter) to the monitor video socket. Connect the
other end of the cable (at the end with the ferrite filter) to
the computer video socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
To Connect the DVI-D Cable
Connect the plug of the DVI-D cable (at the end without
the ferrite filter) to the monitor video socket. Connect the
other end of the cable (at the end with the ferrite filter) to
the computer video socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
To Connect the HDMI Cable
Connect the plug of the HDMI cable to one of the two
HDMI ports on the monitor.
Connect the other end of the cable to the HDMI port of a
digital output device.
To Connect the Component Cable
Connect the plugs of the Component cable to the
Component video inputs on the monitor. The plugs are in
green, blue, and red respectively. Ensure that the colors of
the plugs and the terminals match when making the
connection.
Connect the other end of the cable to the Component
ports of the video output device.
How to assemble your monitor hardware 11