Select Advanced > Port Triggering.
1.
For each port trigger, enter the settings in the Port Trigger List:
2.
Trigger Range. To specify the range of outgoing ports that will be monitored to trigger
•
the incoming port forwarding rule, enter the Start Port and End Port.
Target Range. To specify the range of incoming ports that will be opened when
•
triggered, enter the Start Port and End Port.
Protocol. Select the protocol for the ports:
•
Select the Enable checkbox for the port trigger.
3.
Perform one of the following actions:
4.
Click Apply to save your settings and activate the port triggers.
•
To remove a port trigger, select it's radio button and click Delete.
•
To return all trigger and target ranges to zero, click Reset.
•
NETGEAR Wireless Cable Gateway
Advanced Settings
37