Dmz Host; Lan Ip Setup - NETGEAR CG3100 User Manual

DMZ Host

You can use the DMZ Host screen to set up a default DMZ computer. Specifying a default
DMZ computer allows you to set up a PC that is available to anyone on the Internet for
services that you have not defined. There are security issues with doing this, so only set up
the DMZ host if you are willing to risk open access. If you do not define a DMZ host the
gateway discards any undefined service requests.
Select Advanced > DMZ Host.
1.
If desired, select the Respond to Ping on WAN Port checkbox.
2.
Type the last digit(s) of the IP address in the DMZ Address field.
3.
Click Apply.
4.

LAN IP Setup

The LAN IP screen allows you to configure LAN services such as the IP address of the
gateway and DHCP. The TCP/IP and DHCP default values work fine in most cases.
If you disable the DHCP server, you will need to assign to your
Note:
computer a static IP address to reconnect to the gateway and enable
the DHCP server again.
NETGEAR Wireless Cable Gateway
Advanced Settings
38