Advertisement
QuickSpecs
Configuration Information Factory Integrated Models
NOTE: HP does not allow factory integration of options into standard models listed above.
NOTE:
NOTE:
NOTE:
Configure-to-order servers must start with a CTO Chassis.
NOTE:
NOTE:
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE:
Step 1: Base Server Blade Configuration
Step 1: Base Server Blade Configuration
Step 1: Base Server Blade Configuration
Step 1: Base Server Blade Configuration
Models
Models
Models
Models
Step 2: Choose Required Options (one of the following from each list unless otherwise
Step 2: Choose Required Options (one of the following from each list unless otherwise
Step 2: Choose Required Options (one of the following from each list unless otherwise
Step 2: Choose Required Options (one of the following from each list unless otherwise
noted):
noted):
noted):
noted):
Processors
Processors
Processors
Processors
Memory
Memory
Memory
Memory
Communications
Communications
Communications
Communications
Step 3: Choose Additional Factory Integratable Options
Step 3: Choose Additional Factory Integratable Options
Step 3: Choose Additional Factory Integratable Options
Step 3: Choose Additional Factory Integratable Options
Fibre Channel Options
Fibre Channel Options
Fibre Channel Options
Fibre Channel Options
Step 4: Choose Additional Options for Factory Integration
Step 4: Choose Additional Options for Factory Integration
Step 4: Choose Additional Options for Factory Integration
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional options, including server blade enclosure with enhanced backplanes, interconnect options and power
NOTE:
NOTE:
NOTE:
subsystem options, please refer to the "Options" section below.
HP ProLiant BL25p CTO Blade
Configurable Model ships with:
Configurable Model ships with:
Configurable Model ships with:
Configurable Model ships with:
One additional 10/100 NIC dedicated to iLO Management Four Gigabit NICs
(embedded) with WOL and PXE
NOTE: Two can be upgraded to multifunction network adapters)
NOTE:
NOTE:
NOTE:
One additional 10/100 NIC dedicated to iLO Management
HP BL25p 0265 1.8GHz DC FIO Base
HP BL25p 0270 2.0GHz DC FIO Base
HP BL25p 0275 2.2GHz DC FIO Base
HP BL25p O252 2.6GHz SC FIO Base
HP BL25p O250 2.4GHz SC FIO Base
For dual processor configurations choose one of the above FIO choices, plus one of
the matching option kits below:
HP BL25p Opteron 2.2GHz-1M DC Processor Option Kit
HP BL25p Opteron 2.0GHz-1M DC Processor Option Kit
HP BL25p Opteron 1.8GHz-1M DC Processor Option Kit
HP BL25p Opteron 2.6GHz-1M SC Processor Option Kit
HP BL25p Opteron 2.4GHz-1M SC Processor Option Kit
NOTE: Two-way memory interleaving is enabled when an identical pair of DIMMs is
NOTE:
NOTE:
NOTE:
installed.
1GB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 512 MB)
NOTE:
NOTE:
NOTE:
NOTE: Must install in pairs
2GB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 1 GB)
4GB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 2 GB)
NOTE: Must install in pairs
NOTE:
NOTE:
NOTE:
HP ProLiant BL25/35/45p NIC Mezz FIO Base
FC Adapter Card BL25p/45p
DA - 12160
North America — Version 7 — June 27, 2005
HP ProLiant BL25p Server Blade
HP ProLiant BL25p Server Blade
HP ProLiant BL25p Server Blade
HP ProLiant BL25p Server Blade
382731-405
392444-L21
392442-L21
392440-L21
381588-L21
381587-L21
392440-B21
392442-B21
392444-B21
381588-B21
381587-B21
376638-B21
376639-B21
379300-B21
382850-B21
381881-B21
Page 23
Advertisement
