HP 275 Quickspecs page 12

QuickSpecs
Standard Features (Server Blade Enclosure and Interconnects)
ProLiant BL p-Class ProLiant BL p-Class ProLiant BL p-Class ProLiant BL p-Class
Storage Connectivity Kit Storage Connectivity Kit Storage Connectivity Kit Storage Connectivity Kit
Option Option Option Option
(Supports two CGESM or
GbE2 switches per kit)
ProLiant BL p-Class ProLiant BL p-Class ProLiant BL p-Class ProLiant BL p-Class
RJ-45 Patch Panel RJ-45 Patch Panel RJ-45 Patch Panel RJ-45 Patch Panel
(Two patch panels per kit)
(Every BL p-Class server
blade enclosure requires
two Interconnect switches
OR two RJ-45 patch
panels)
ProLiant BL p-Class RJ-45 ProLiant BL p-Class RJ-45 ProLiant BL p-Class RJ-45 ProLiant BL p-Class RJ-45
Patch Panel 2 (with Fibre Patch Panel 2 Patch Panel 2 Patch Panel 2
Channel pass through)
(Two patch panels per kit)
(Every BL p-Class server
blade enclosure requires
two Interconnect switches
OR two RJ-45 patch
panels)
NOTE: NOTE: NOTE: NOTE: The Patch Panel 2
or a Switch Interconnect
Kit is required for SAN
connectivity on the HP
ProLiant BL25p server
blade
Required Network Required Network Required Network Required Network
Cabling Cabling Cabling Cabling
The Storage Connectivity Kit is used if HP ProLiant BL25p Fibre Channel signal pass-through is desired
when using the CGESM or GbE2 Interconnect Switch. Therefore, both LAN cable consolidation and SAN
connectivity is possible using a single interconnect option. Order one Storage Connectivity Kit per server
blade enclosure for Fibre Channel pass through.
The Storage Connectivity Kit includes two OctalFC Interconnect Modules that provide sixteen open
transceiver slots for the pluggable small form factor transceivers that come with each HP ProLiant
BL25/45p Dual port Fibre Channel Adapter. The Storage Connectivity Kit supports up to eight HP
ProLiant BL25p server blades (for a total of sixteen Fibre Channel signals).
6U (10.5-inch), Plugs into HP BladeSystem p-Class 6U server blade enclosures
Used to pass NIC signals from all server blades in server blade enclosure out as RJ-45 connections
Supports Gigabit Ethernet network adapters
16 RJ-45 connectors on the back of each BL p-Class 6U RJ-45 Patch Panel (32 RJ-45 connections per
server blade enclosure)
6U (10.5-inch), Plugs into HP BladeSystem p-Class 6U server blade enclosures
Used to pass NIC signals from all server blades in server blade enclosure out as RJ-45 connections also
used to pass Fibre Channel signals for SAN connectivity
Supports Gigabit Ethernet network adapters
16 RJ-45 connectors on the back of each RJ-45 patch panel 2 (32 RJ-45 connections per server blade
enclosure)
Fibre Channel, Fibre Channel, Fibre Channel, Fibre Channel,
pass through pass through pass through pass through
10Base-T
100Base-TX
1000Base-T
1000Base-SX
NOTE: For cabling information, refer to the Web site at: NOTE: NOTE: NOTE:
http://www.compaq.com/products/servers.
DA - 12160 North America — Version 7 — June 27, 2005
Fibre Channel signals travel from a HP ProLiant BL25p server blade with a
Dual-Port Fibre Channel Adapter through p-Class server blade enclosure
backplane. The Fibre Channel signals are terminated through the RJ-45
Patch Panel 2 in the interconnect bays. To provide redundancy each server
blade has two Fibre Channel signals and one Fibre Channel signal
terminates through the right RJ-45 Patch Panel 2, one Fibre Channel signal
travels terminates through the left RJ-45 Patch Panel 2.
8 Fibre Channel small form factor pluggable (SPF) transceiver slots on the
front of each RJ-45 patch panel 2 (16 Fibre Channel connections per server
blade enclosure); for insertion of SPF transceivers included with the Dual-port
Fibre Channel Adapter
Categories 3, 4 or 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
Category 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
Category 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
50/125 µm Multimode Fiber, 400 MHz/Km (500 meters)
50/125 µm Multimode Fiber, 500 MHz/Km (550 meters)
62.5/125 µm Multimode Fiber, 160 MHz/Km (220 meters)
62.5/125 µm Multimode Fiber, 200 MHz/Km (275 meters)
HP ProLiant BL25p Server Blade HP ProLiant BL25p Server Blade HP ProLiant BL25p Server Blade HP ProLiant BL25p Server Blade
Page 12