Toggle Latch Release; Frame Separation; Toggle Latch; Frame Positioning - Pride HURRICANE Owner's Manual

V I I . D I S A S S E M B L Y A N D A S S E M B L Y

Toggle Latch Release

1. Push in the toggle latch release button while pulling back the toggle latch. See figures 18 and 18A.
2. Position the toggle latch buckle over the top of the toggle latch. See figure 18B.
TOGGLE

TOGGLE LATCH

LATCH RELEASE
BUTTON
Figure 18. Toggle Latch
(Latched)

Frame Separation

1. Lower the tiller to the PMV floorboard.
2 Push back on the seat post to pivot the PMV's rear section rearwards until the rear section is standing
vertically on its bumper. See figure 19.
3. Lift the front section up until the lower pegs are no longer in the slots. See figure 20.
4. Carefully move the front section away from the rear section.
Figure 19. Frame Positioning
32
Figure 18A. Toggle Latch
(Unlatched)
www.pridemobility.com
TOGGLE LATCH
BUCKLE
Figure 18B. Buckle
Secured
SLOT
PEG
Figure 20. Separating The Frame Sections
Hurricane