Table of Contents
Advertisement
V I . C O M F O R T
ARMREST ANGLE
You can adjust the armrest angle to fit your specific needs.
To change the armrest angle:
1. Lift the armrest straight up so that it is perpendicular to
the floor.
2. Use a 5/32-in. hex wrench to loosen the hex screw. See
figure 10.
3. Turn the screw counterclockwise to raise the front of the
armrest and clockwise to lower the front of the armrest.
4. Lock into place by tightening the 7/16-in. nut.
JOYSTICK EXTENSION
The joystick control can easily be adjusted out away from the
armrest or in toward the armrest.
To extend the joystick:
1. Use a 3/16-in. hex wrench to loosen the setscrew. See figure
11.
2. Slide the joystick mounting bracket into or out of the
armrest to the desired position.
3. Retighten the setscrew by turning clockwise.
SWING-AWAY JOYSTICK
Your Jazzy may be equipped with a swing-away joystick. This
option enables you to move the joystick from the front of the
armrest to the side of the armrest without disconnecting it.
FOOT PLATFORM HEIGHT
The foot platform height is easily adjusted to six different
heights. See figure 12.
To raise or lower the platform:
1. Remove the two 7/16-in. bolts from the platform.
2. Raise or lower the platform to your desired height.
3. Reinstall the two 7/16-in. bolts into the platform.
22
www.pridemobility.com
A D J U S T M E N T S
ARMREST
ANGLE
ADJUSTMENT
SCREW
Figure 10. Armrest Angle
Figure 11. Joystick Extension
LOOSEN THIS
SETSCREW
TO ADJUST
JOYSTICK
BRACKET
Jazzy 1105/RevH/Feb03
Advertisement
Table of Contents
