12.
Remove the top cover.
Reverse this procedure to install the top cover.
Fingerprint reader board
Description
Fingerprint reader board dv3000 (includes fingerprint reader board bracket)
Fingerprint reader board dv3500 (includes fingerprint reader board bracket)
Before removing the fingerprint reader board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Switch cover (see
e.
Top cover (see
Remove the fingerprint reader board:
1.
Turn the top cover upside down, with the front toward you.
2.
Release the ZIF connector to which the fingerprint reader board cable is attached and disconnect
the cable (1) from the connector.
Battery on page
43).
Hard drive on page
51)
Optical drive on page
Keyboard on page
54)
Switch cover on page
Top cover on page
58)
48)
57)
Component replacement procedures
Spare part number
468831-001
502464-001
61