HP PAVILION DV3000 Maintenance And Service Manual page 73

11. Remove the display assembly (2).
12. If it is necessary to replace any of the display assembly internal components, remove the two rubber
screw covers (1) on the display bezel bottom edge. The rubber screw covers are included in the
Display Rubber Kit, spare part number 468802-001 for dv3000 models, 500966-001 for dv3500
models with an LCD display, and 502460-001 for dv3500 models with an LED display.
13. Remove the two Phillips PM2.5×5.0 screws (2) that secure the display bezel to the display
assembly.
14. Flex the inside edges of the left and right sides (1) and the top and bottom edges (2) of the display
bezel until the bezel disengages from the display enclosure.
Component replacement procedures 65