Display Assembly - HP PAVILION DV3000 Maintenance And Service Manual

Display assembly

Description
13.3-inch, WXGA BrightView display assembly for use in dv3000 models (includes webcam/
microphone module, webcam/microphone module cable, 2 microphones, and 3 wireless antenna
transceivers and cables)
13.3-inch, WXGA BrightView display assembly for use in dv3500 models with an LCD display
(includes webcam/microphone module, webcam/microphone module cable, 2 microphones, and 3
wireless antenna transceivers and cables)
13.3-inch, WXGA BrightView display assembly for use in dv3500 models with an LED display
(includes webcam/microphone module, webcam/microphone module cable, 2 microphones, and 3
wireless antenna transceivers and cables)
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Disconnect the wireless antenna cables from the WLAN module (see
6. Remove the following components:
a. Keyboard (see
b. Switch cover (see
c. Top cover (see
Remove the display assembly:
1. Close the computer.
2. Turn the computer upside down, with the rear panel toward you.
3. Remove the two Phillips PM2.5×7.0 screws (1) that secure the display assembly to the computer.
Battery on page 43).
Keyboard on page 54)
Switch cover on page
Top cover on page 58)
57)
Component replacement procedures
Spare part number
468806-001
496107-001
496108-001
WLAN module on page 45).
63