Heat Sink - HP PAVILION DV3000 Maintenance And Service Manual

4. Lift the modem module (4) straight up to disconnect it from the system board.
5. Remove the modem module.
Reverse the above procedure to install the modem module.

Heat sink

Description
Heat sink for use in dv3000 models (includes heat sink retention clip and replacement thermal
material)
Heat sink for use in dv3500 models (includes heat sink retention clip and replacement thermal
material)
Before removing the heat sink, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Optical drive (see
b. Hard drive (see
c. Keyboard (see
d. Switch cover (see
e. Top cover (see
80 Chapter 4 Removal and replacement procedures
Battery on page 43).
Optical drive on page
Hard drive on page 51)
Keyboard on page 54)
Switch cover on page
Top cover on page 58)
48)
57)
Spare part number
468829-001
501015-001