Table of Contents
Advertisement
System Requirements
l
Windows® 2000/XP/Server 2003/Vista
l
Available PCI slot
Hardware Installation
1.
Turn Off the power to your computer.
2.
Unplug the power cord and remove your computer' s cover.
3.
Remove the slot bracket from an available PCI slot.
4.
To install the card, carefully align the card' s bus connector with
the selected PCI slot on the motherboard. Push the board down
firmly.
5.
Replace the slot bracket' s holding screw to secure the card.
6.
Replace the computer cover and reconnect the power cord.
Driver Installation
Please make sure the board is installed before proceeding with driver
installation.
For Windows® 2000
1.
At the Found New Hardware Wizard, click Next.
2.
Select Search for a suitable driver for my device
3
Advertisement
Table of Contents
Need help?
Do you have a question about the MULTI I/O COMBI PCI ADD-ON CARD and is the answer not in the manual?