Table of Contents
Advertisement
Follow steps 1-4 again to change the other one serial port if
needed.
Change Parallel Port Address
Some parallel devices need a specific
your parallel devices works properly, do not change this settings.
For Windows® 2000/XP/Server 20003/Vista Installation
1.
From the Device Manager window double click Ports(COM &
LPT), then double click the MosChip PCI Parallel Port ...
2.
Click Port Settings tab.
3.
At the LPT Port Number box, click the down arrow and select
an LPT port that is not in use.
4.
Click OK, then close Device Manager to save the changes.
parallel
port in order to work. If
7
Advertisement
Table of Contents
Need help?
Do you have a question about the MULTI I/O COMBI PCI ADD-ON CARD and is the answer not in the manual?