Troubleshooting; Basic Functioning; The Mini Print Server Has No Power - NETGEAR PS121 User Manual

This chapter gives information about troubleshooting your NETGEAR PS121 Mini Print Server.
After each problem description, instructions are provided to help you diagnose and solve the
problem. For the common problems listed, go to the section indicated.
• Is the mini print server on and is the Status light lit?
Go to "Basic Functioning" on page
• Have I connected the mini print server correctly?
Go to "Printing Errors" on page
• I can't access the mini print server from my computer.
Go to "Troubleshooting the TCP/IP Settings Using Ping" on page 4-3
• I can't remember the mini print server's configuration password, or I want to clear the
configuration and start over again.
Go to "Restoring the Default Configuration" on page
• How can I check the printer's current status remotely?
Go to "Checking the Current Status of the Printer" on page 4-4

Basic Functioning

Note: For the most up-to-date PS121 installation details and troubleshooting guidance
visit www.netgear.com.
If you have trouble setting up your PS121, check the tips below.

The mini print server has no power

• Make sure the power cord is connected to the mini print server.

Troubleshooting

4-1.
4-2.
Chapter 4
Troubleshooting
4-4.
4-1