NETGEAR PS121 User Manual page 19

Run the Print Server Setup Wizard to Set
Up a Fixed IP Address for the PS121.
The Print Server Setup Wizard screen
a.
should be displayed.
Click Next to proceed.
b.
The Print Server Wizard will now search
your network for the PS121.
If the Print Server Setup Wizard cannot
find your PS121, check the network
connections and status lights on the
PS121.
The "Server Name" and the "IP
c.
Address" your network assigned to the
PS121 are displayed. Click Next to
proceed to the device name screen.
You can enter a descriptive Device
d.
Name and Domain Name or accept the
defaults. Click Next to proceed to the IP
Address configuration screen.
The Print Server Wizard displays a
recommended static IP address setting
for the PS121. This is usually fine.
Click Next to proceed.
e.
Click Finish to exit the Print Server
f.
Setup Wizard. This completes the
configuration of the PS121 for operation
on your network.
Click Yes to run the Add Printer Port
g.
Wizard. Follow the instructions in the
next section for using the this wizard to
set up each computer to use the PS121.
Setup
User Manual for the NETGEAR PS121 Mini Print Server
IP Address your network assigned to the PS121.
Select Print Server screen
Select Print Server Device Name screen
Set UP a Fixed IP Address for your PS121.
In this example, the address was set to
192.168.0.245. Since most home routers
reserve the first 50 addresses for their DHCP
pool, picking a number between 200 to 250
should work fine. Numbers above 254 will
not work.
3-5