Troubleshooting; Basic Functioning; The Print Server Has No Power - NETGEAR PS121 - USB Mini Print Server User Manual

This chapter gives information about troubleshooting your PS121v2 USB Multifunction Print
Server. After each problem description, instructions are provided to help you diagnose and solve
the problem. For the common problems listed, go to the section indicated.
• Is the print server on and is the Status light lit?
Go to "Basic Functioning" on page
• Have I connected the print server correctly?
Go to "Printing Errors" on page
• How can I check the printer's current status remotely?
Go to "Checking the Current Status of the Printer" on page 4-3

Basic Functioning

Note: For the most up-to-date PS121v2 installation details and troubleshooting
guidance visit www.netgear.com.
If you have trouble setting up your PS121v2, check the tips below.

The print server has no power

• Make sure the power cord is connected to the print server.
• Make sure the power adapter is connected to a functioning power outlet. If it is in a power
strip, make sure the power strip is turned on. If it is plugged directly into the wall, verify that it
is not a switched outlet.
• Make sure you are using the correct NETGEAR power adapter supplied with your print server.
4-1.
4-2.
v2.0, April 2007
Chapter 4

Troubleshooting

4-1