Edid Timings; Display Info; Display Status - Barco MDNC-2221 User Manual

4. Select one of the available input signals and confirm.

5.15 EDID timings

About EDID timings
Following EDID timings are available for your NIO 2MP LED Display:
Refresh Rate
Preferred Orientation
Color Depth
To manually set EDID timings:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Image Source menu.
3. Enter the Timings submenu.
4. Select Refresh Rate, Preferred Orientation or Color Depth.
5. Select one of the available settings and confirm.

5.16 Display info

About display info
Your display serial number, color type, native resolution, firmware versions, etc. are available in a dedi-
cated submenu of the OSD menu.
To retrieve info about your display:
1. Bring up the OSD main menu.
2. Navigate to the About this Display menu to make the information visible on the screen.

5.17 Display status

About display status
The Status submenu of the OSD menu provides info on the current status of your display (runtimes, tem-
peratures, etc.), the status of the connected image sources (video encoding mode, timings, etc.), the
current calibration status of your display (display function, luminance, ALC, etc.) and the status about
activated connections.
To retrieve the status of your display:
1. Bring up the OSD main menu.
2. Navigate to the Status menu.
K5903058 NIO 2MP LED DISPLAY 04/03/2014
Allows to manually select the refresh rate of the
image source video input signal depending on the
maximum refresh rate of the display controller
connected to your display.
Allows to change the orientation of the image
source video input signal to landscape, portrait or
to let the display automatically assign the correct
orientation.
Allows to change the color depth to 8 or to 10 bit.
5. Advanced operation
25