Edid Timings; Edid Format; Display Info - Barco Nio 5MP LED User Manual

Hide thumbs Also See for Nio 5MP LED:
Table of Contents

Advertisement

4.18 EDID timings

About EDID timings
Following EDID timings are available for your Nio 5MP LED:
Refresh Rate
Color Depth
To manually set EDID timings:
1.
Bring up the OSD main menu.
2.
Navigate to the Configuration > Image Source > Input Settings menu.
3.
Enter the DisplayPort or DVI submenu according to the input.
4.
Enter the EDID submenu.
5.
Select Refresh Rate or Color Depth.
6.
Select one of the available settings and confirm.

4.19 EDID format

About EDID format
Your Nio 5MP LED describes its capabilities to the display controller by means of display identification data.
This data contains timings, display size, pixel mapping info, etc. and is needed to make sure that the video
source can be correctly displayed.
Display identification data is structured in a standard VESA format. Depending on the configuration setup of
your system, a different format can be used.
The Nio 5MP LED supports following EDID formats:
E-EDID V1.4: E-EDID is a mature and more commonly used format. It is supported by most display
controllers and operating systems.
DisplayID V1.3: DisplayID is designed to replace E-EDID and supports more advanced communication
between your Nio 5MP LED and its display controller. Since not all display controllers and operating
systems support DisplayID already, it should only be selected if all components are DisplayID compatible.
To select the EDID format
1.
Bring up the OSD main menu.
2.
Navigate to the Configuration > Image Source > Input Settings menu.
3.
Enter the EDID format submenu.
4.
Select one of the available settings and confirm.

4.20 Display info

About display info
Your display serial number, native resolution, firmware versions, etc. are available in a dedicated submenu of
the OSD menu.
Allows to manually select the refresh rate of the image
source video input signal depending on the maximum
refresh rate of the display controller connected to your
display.
Allows to change the color depth to 8 or to 10 bit.
K5902121 /04
Advanced operation
Nio 5MP LED
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mdng-5221

Table of Contents