Table of Contents
Advertisement
enable port
Syntax:
enable port <port range>
Description:
Enable LD and corresponding action. Enable LD per port.
Argument:
<port range>: The range of your setting enabled loop detection with ports.
Possible value:
<port range>: syntax: 1,5-7, available from 1 to 8
Example:
GSW-0890(loop-detection)# enable port 4-6
show
Syntax:
show
Description:
Show Loop Detection status
Argument:
None
Possible value:
None
Example:
GSW-0890(loop-detection)# show
Locked port action: Enable
184
Advertisement
Table of Contents
