Answer/receive mode
•
FAX
mode
•
TEL
mode
•
TAM
mode
!
Press the Answer button. The button will light up. When the Answer button is on. TAM
mode overrides any mode that was set with the Rcv.Mode/Contrast button.
Additional features
34
•
In Ready mode, FX appears in the right hand corner of the
display.
•
When you get a call, the machine answers after the second ring,
and receives the fax automatically. When reception is complete,
the machine returns to Ready mode.
•
If you want to change the number of rings before it answers, see
Set rings to answer
•
In Ready mode, TL appears in the right hand corner of the
display.
•
Automatic fax reception is turned off. You can receive a fax only by
lifting the handset and pressing Start/Enter.
•
In Ready mode, TM appears in the right hand corner of the display
whenever the Digital Message Center is turned on (The Answer
button will be lit.)
•
When a call comes in, the answering machine answers and
records the caller's message if they leave one. If the machine
detects a fax signal, it goes into receive mode.
•
When your answering machine answers an incoming call, it
records a fax tone until it realizes a fax is coming through. Due to
this, your answering machine may tell you a voice message has
been left, even when it is actually a fax.
on page 27.