Make A Telephone Call - HP 1040 SERIES User Manual

Make a telephone call

!"
5. Press
TIP: The maximum enlargement percent depends on the model you purchased.
6. Press Copy to start copying or press Start/Enter to go to the next option.
Collate then Off will display.
!"
7. Press
If Collate is Off, pressing either Copy or Start/Enter will start copying.
8. If Collate is On, press Copy to start copying or press Start/Enter to go to the next
option.
Print Order then Normal will display.
!"
9.
Press
Printing the copies in reverse order will cause the first page to be on top when the copy
is complete.
10.Pressing either Copy or Start/Enter will start copying.
Make a telephone call
Use one of the following methods:
•
Pick up the handset and dial the number.
•
Press and hold a One Touch number. This turns on the speaker. When you are
connected, pick up the handset (HP 1050 Fax does not have to pick up handset since
it has a speakerphone.) For more information, see
• Press the Speed Dial button, enter a speed dial code and press Start/Enter. This turns
on the speaker. When you are connected, pick up the handset (HP 1050 Fax does not
have to pick up handset as it has a speakerphone.) For more information, see
the phone book
• HP 1050 Fax: Press the Speakerphone button and dial the number.
NOTE: One touch and speed dial codes must have already been entered before you can
use them. For more information, see
Quick start 4
to select the reduction or enlargement percentage you want (50 –125).
to select On if you want the copies collated.
to select Reverse if you want the last page printed first.
on page 24.
One-touch dialing
Store a number in the phone book
on page 24.
Dial from
on page 23.