Voice Dialling - Sony Ericsson V800 Swisscom User Manual

4. If the recording sounds ok } Yes. If not } No and repeat
step 3.
5. To record another voice command for a contact
} New voice } Add again and repeat steps 2-5 above.
Caller name
You can choose whether you want to hear the recorded contact
name when you receive a call from that contact.
To turn the caller name On or Off
} Settings } the General tab } Voice control
} Play caller name.

Voice dialling

You can voice dial by saying a pre-recorded voice command.
Start voice dialling from standby using the phone, a portable
handsfree, a Bluetooth headset or by saying your magic word.
To make a call from the phone
1. From standby, press and hold one of the volume buttons.
2. Wait for the tone and say the name you recorded earlier,
for example "John mobile". The name is played back
to you and the call is connected.
This is the Internet version of the user's guide. © Print only for private use.
To make a call with a handsfree
From standby, press the handsfree button, or Bluetooth
headset button.
The magic word
You can record a magic word and use it as a voice command
to allow totally handsfree access to voice dialling. Instead of
pressing and holding a volume button to voice dial, you say the
magic word and then one of your recorded voice commands.
The magic word is especially suitable when using a car
handsfree kit.
Note: Choose a long, unusual word or phrase that can easily
be distinguished from ordinary background speech.
To activate and record the magic word
1. } Settings } the General tab } Voice control
} Magic word } Activate.
2. Instructions appear. } Continue. Wait for the tone
and say the magic word.
3. Instructions appear. } Continue and select the
environments in which you want your magic word
to be activated. You can select several alternatives.
Basics
33