Voice Dialling - Sony Ericsson Walkman W800 User Manual

Calling
commands. An icon appears next to
a phone number that has a voice
command.
To activate voice dialling and record
names
} Settings }
1
} Voice control } Voice dialling
} Activate } Yes } New voice
and select a contact.
2 If the contact has more than one
number, use
the numbers. Select the phone
number to which you want to add
the voice command. Now you are
going to record a voice command
such as "John mobile" for the
phone number you selected.
3 Instructions appear. Wait for the
tone and say the command that
you want to record. The voice
command is played back to you.
4 If the recording sounds ok
} No
If not,
5 To record another voice command
for a contact
again and repeat steps 2-4 above.
Caller name
You can choose whether you want to
hear the recorded contact name when
you receive a call from that contact.
28
This is the Internet version of the user's guide. © Print only for private use.
the tab
General
and to view
}
Yes.
and repeat step 3.
} New voice } Add
To turn the caller name on or off
} Settings }
the
General
control } Play caller

Voice dialling

You can voice dial by saying a pre-
recorded voice command. Start voice
dialling from standby using the phone,
a portable handsfree, a Bluetooth™
headset or by saying your magic word.
To make a call from the phone
1 From standby, press and hold one
of the volume buttons.
2 Wait for the tone and say the
name you recorded earlier, for
example "John mobile". The name
is played back to you and the call
is connected.
To make a call with a handsfree
From standby, press the handsfree
button, or the Bluetooth headset
button.
The magic word
You can record a magic word and use
it as a voice command to allow totally
handsfree access to voice dialling.
Instead of pressing and holding a
volume button to voice dial, you say
the magic word and then one of your
} Voice
tab
name.