Sony Ericsson V800 Swisscom User Manual page 89

Checkword and security
To confirm that you have entered the correct passcode for the
code memo and to prevent unauthorized access to your codes,
you must enter a checkword.
When you enter your passcode to open the code memo, the
checkword is shown for a short time. If the passcode is correct,
the correct codes are shown. If you enter the incorrect
passcode, the checkword and the codes that are shown
are also incorrect.
Factors strengthening the security of the code memo
function are:
• You get no feedback about whether the passcode is correct,
except for the checkword, and only you know the checkword.
• All codes are encrypted in the phone.
• When you access your codes, they are shown for a limited
time only.
To open code memo for the first time
1. } Organizer } Code memo. A message with instructions
is displayed } Continue.
2. Enter a four-digit passcode to open code memo } Continue.
3. Re-enter the new passcode to confirm.
This is the Internet version of the user's guide. © Print only for private use.
4. Enter a checkword (maximum 15 characters) } Done.
The checkword can consist of both letters and numbers.
The next time you open the code memo, your checkword
appears after you enter the passcode, and then your added
codes are shown.
To add a new code
1. } Organizer } Code memo and enter your passcode
} New code } Add.
2. Enter a name associated with the code, for example,
the name of the credit card company } Continue.
3. Enter the code } Done.
To change the passcode
1. Open code memo as described above } More
} Change passcode.
2. Enter your new passcode } Continue.
3. Re-enter the new passcode } Continue.
4. Enter a checkword } Done.
Forgot your passcode?
If you forget your passcode, just enter any passcode to access
the code memo function. The checkword and codes that are
then shown are incorrect. You must now reset the code memo.
More features
89